LSBio
Dextranase Antibody (Liquid)

Both the antiserum and IgG fractions of anti-Dextranase (Penicillium) are shown to detect under reducing conditions of SDS-PAGE the 41,000 dalton enzyme in cellular extracts. Approximately 10 ug of total protein is loaded per lane. A 1:2,000 dilution of the primary antibody is used followed by detection using HRP Goat-a-Rabbit IgG [H&L] (611-1302) diluted 1:4,000 and color development using 4-CN substrate until sufficient color develops. Other detection systems will yield similar results.

Dextranase Antibody (Liquid)

Primary AntibodyLSBio Guarantee
Antibody:Rabbit Polyclonal
Applications:Enzyme-Linked Immunosorbent Assay, Immunoprecipitation, Western Blot
Reactivity:Fungus / Yeast / Mold
Format:Liquid
See all Penicillium Dextranase antibodies →
$311.00each
Catalog Number: LS-C744957-25

For bulk orders or custom formulations:

Request a Quote

Overview

Description
Dextranase antibody LS-C744957 is an unconjugated rabbit polyclonal antibody to penicillium Dextranase. Validated for ELISA, IP and WB.
Application
ELISA, IP, WB
Reactivity
Fung
Intended Use
RUO
Guarantees
This antibody carries the LSBio 100% Guarantee. ✓
Category
Antibodies > Primary Antibodies > Polyclonal Antibodies
Recommended Dilution: ELISA
1:5000 - 1:20000
Recommended Dilution: IP
1:100
Recommended Dilution: WB
1:500 - 1:5000

Target

Target
Penicillium Dextranase
Antigen Species
Fung
Epitope
Assay by immunoelectrophoresis resulted in a single precipitin arc against anti-Rabbit Serum as well as purified and partially purified Dextranase [Penicillium species]. Cross reactivity against Dextranase from other tissues and species may occur but have not been specifically determined.

Antibody

Host Species
Rb
Clonality
Polyclonal
Isotype
IgG

Immunogen

Immunogen
Dextranase [Penicillium species]

Format

Conjugate/Label
Unconj
Format
Liquid
Formulation
0.02 M Potassium Phosphate, pH 7.2, 0.15 M NaCl, 0.01% Sodium Azide
Concentration
1 mg/mL
Volume
25 Microliter
Preservative
Yes
Purification Method
IEX

Storage & Handling

Storage Conditions
Store vial at 4°C prior to restoration. For extended storage aliquot contents and freeze at -20°C or below. Avoid freeze-thaw cycles. Stable for several weeks at 4°C as an undiluted liquid. Dilute only prior to immediate use.
Recommended Storage Buffer
0.02 M Potassium Phosphate|0.15 M NaCl

Request SDS/MSDS

To request an SDS/MSDS form for this product, please contact our Technical Support department at: technical@vectorlabs.com.